Install Moisture Monitor

For a variety of reasons, keeping an eye on what happens in a crawlspace or basement is essential. Many people don't go into their basements on a regular basis, and they may only go into their crawl spaces a few times a year. There could be catastrophic damage to your belongings if there is an issue with your sump pump equipment, or if the temperature and/or humidity levels are too high or too low. Even if you have a backup sump pump system in place, you are still at risk because components in the crawlspace or basement are susceptible to malfunction.

What is the best way to get moisture out of a crawl space?

It could take up to eight to ten hours to completely dry out a flooded crawl space. Warm, moving air absorbs moisture more readily than cold, still air. Set up a low-temperature heat source, such as a light bulb, inside the crawl space, and position one or more electric fans so that they can blow air across damp surfaces to expedite the drying process.

It's a good idea to install a dehumidifier in a crawl space, right?

With the help of a dehumidifier in your crawl space, you can reduce the amount of moisture in the air and improve the overall air quality. It is possible to reduce and even prevent some allergy symptoms by improving indoor air quality through moisture control. Symptoms of allergies can include eye irritation, headaches, and respiratory issues.

What is the best way to check for moisture in my home?

Pour two or three ice cubes into a glass and fill with water, stirring constantly. Wait three to four minutes before continuing. If no moisture forms on the outside of the glass, the air is likely too dry; you may need to use a humidifier to remedy the situation. A high level of relative humidity is indicated by the presence of water condensation on the outside of the glass.

What can I put under my house to keep it from getting wet?

Make sure there is plenty of ventilation in the crawlspace. Sand should be used to fill in any low spots in the crawlspace. Cover the ground beneath the crawlspace with a layer of 6 mil or thicker plastic to protect it from moisture. Placing a layer of sand on top of the plastic will help to keep the plastic in place and will also help to absorb any extra moisture.

Is it possible for a crawl space to dry out on its own?

It is insufficient to simply allow the crawl space to dry on its own. All moisture and humidity must be removed from the space before you can proceed. To dry the surfaces of your crawl space, use large fans to blow air across them. This aids in the creation of airflow throughout the area, which aids in the completion of the drying process.